This web site is designed for 800 x 600 screens with 16 bit resolutions.

It's best viewed with
   Best Viewed With MSIE 3.0!
   Best Viewed With Netscape 3.0!
 Click Here To Start.

R/C Modeling Logo
Articles & Contributions

This area is dedicate to groups and individuals who have contributed articles to this website. Please feel free to contribute!               THANKS
{short description of image}
RCU, IMAC, SA, IMAA, and GSAL EMail Lists
by various authors

  1. Build Your Own Fuel Can with Pump
  2. Stability and Trim Calculations for Models
  3. What is an Awesome Pilot?
  4. What All That Stuff Means On The Radio Box
  5. Two Stroke Engine Oils
  6. Effect of Baffling on a Gas Engine
  7. Walbro Gas Engine Tuning
  8. Generic Gas Engine Tuning
  9. On Board Glow Plug Driver
  10. Snap Rolls by Mike McConville
  11. Don't Solo until you are READY!
  12. 2 Cycle Oil Test Summary
  13. Spark Plug Wear Patterns
  14. Wire Gauge and Current Limits
  15. Propeller Selector
  16. Choosing Your Propeller
  17. Landing Tail Draggers
  18. DSC Wiring for Futaba 9C
  19. Analog and Digital Servos
  20. Aerodynamics Center (by The Selkirk Aviation College)
  21. Build Your Own Fuel Pump & Can
  22. Build Your Own Floats
  23. Build Your Own R/C Trailer
  24. Story told by a Previously Frustrated Beginner
  25. Cutting Surface - Glass
  26. Cutting Surface - Sewing Mat
  27. Reforcing Control Surface Edges
  28. Fun Fly Ideas
  29. Drill Size Chart
  30. Hobbico Quick Field Charger MkII
  31. Epoxy Container Holders

{short description of image}
Tips by the Radio Control Flying Club of Toronto
by Richard Staron and others

  1. Gas Engine Standoffs
  2. Taming the Stall
  3. Loaded Digital Voltmeter Adapter
  4. Color Schemes for Better Visibility
  5. Buying Used Equipment
  6. What Adhesive to Use what for Maximum Strength
{short description of image}
Aviation Humor by Various Contributors

  1. Wit and Wisdom - From the Military Manuals
{short description of image}

Developed by Geistware of Indiana© ., 1999.
Updated February 3, 2007

   

Top