This web site is designed for 800 x 600 screens with 16 bit resolutions.

It's best viewed with
   Best Viewed With MSIE 3.0!
   Best Viewed With Netscape 3.0!
 Click Here To Start.

R/C Modeling Logo
Da Hangar - Hangar 9 Extra 330s
    Return to Index
{short description of image}

I decided to assemble my Hangar 9 Extra 330s with the BME 102 for power. It flew it's maiden flight on April 6th, 2006. I decided to use the Hangar 9 AnglePro 4-in-1 Digital Throw / Incidence Meter (HAN192)to set up the plane. This is an excellent tool that everyone should own and use. I can perform 4 - one second aileron rolls on an up-line without the plane loosing track.

During flight 267 (11/5/06) one of the two bolts that hold the carburetor on broke and I had a dead stick landing. During the diagnosis, I inadvertantly opened the gap on my left side cylinder. The engine ran but only on once clyinder. Once the gap was reset, then engine was adjusted and it ran great! Today 12/3/06 on my 309th flight, my left wing exploded approaching the runway during a high speed pass. The explosion was so violent only the aileron was found. The plane and engine are totaled. This was a great bird and will be missed.


Take a look at the pictures below..

{short description of image}

Developed by Geistware of Indiana© ., 1999.
Updated Novmeber 6, 2006